Convertech Support- Leaf Style O-ring service:
|
 |
All product support videos require Java™ to be installed and enabled.
|
|
Leaf Style O-Ring Service:
To remove bladder assembly from machine: (see shaft removal on right)
- Remove shaft from machine
- Remove snap ring from end cap with snap ring pliers
- Remove end cap to expose bladder assembly
|
|
|
|
Bladder removal from assembly
(see bladder removal)
- Repeat steps 1-3 at other end of assembly
- Remove leaf
- Slide or cut bladder off
|
|
|
|
|
|
End Cap assembly
- Slide new bladder on with silicone
- Insert o-ring and compression ring in place
(see end cap assembly on right)
- Trim flush with ring and install that end cap
- Put end cap back on
- Put leaves on
|
|
No specialty tools required! Convertech shafts and chucks defy industry standards with their ease of repair. This is all you will need:
- hammer
- slotted screwdriver
- allen wrenches
- retaining ring pliers
- knife
- punch
- silicone spray
NO special banding tool
NO hydraulic presses
NO complex button repair
Easy to use bladder cartridges
Why waste time with lengthy repairs and costly downtime? By designing our expanding shafts and chucks to accomodate our customer's needs we have insured an easy-to-use and easy-to-repair product line.
|
